Lifeline Prelude Available Sizes
Prelude comes in 1 Gallon and 5 Gallon pails to easily complete any project. Samples are available.
Product Information
Prelude is a clear once coat primer that smooths out rough wood surfaces so new finish can be accepted evenly. It is ideal for old wood, wood that has been media blasted or hand hewn. Prelude is ideal for both interior and exterior wood surfaces.
Features
- Contains UV Boost
- Enhances Wood Grain
- Ideal for porous wood surfaces
- Not to be used with Deck Defense
Application Temperature
40° to 90°F
Application Methods
Airless sprayerBrush
Surface Preparation
Clean and dryFree of mold and mildew
Never use steel wool
Special Instructions
Back-brushing requiredStir container every 15-20 minutes
Maintain a wet edge to avoid lap marks
Avoid applying in direct sun
Shelf Life
3 Years
Frequency
One time surface sealerDrying Time
Dry to the touch in 1 hourCures within 72 hours
Coverage Rate
200-400 square feet / gallonPerma-Chink Stain Calculator
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
Reviews
There are no reviews yet.