Sansin Nature’s Oil

Concentrated Natural Oil Finish for Interior Wood

Sansin Nature’s Oil is a rich, plant-based oil finish designed to enhance and protect interior wood surfaces in a single penetrating coat. With low VOCs and no harsh solvents, this eco-friendly formula delivers a smooth, natural finish that highlights the grain and character of wood. Perfect for timbers, cabinetry, trim, and furniture, Nature’s Oil can be applied by brush, pad, or cloth and offers excellent flow and workability.

What Makes Sansin Nature’s Oil Unique?

Unlike synthetic oil finishes, Sansin Nature’s Oil contains the finest natural oils to nourish and protect interior wood without raising the grain or masking its texture. It augments the wood’s natural tone while delivering a deep, silky sheen. Its concentrated formula can be used straight or diluted for different absorption levels, and the finish can be renewed with light maintenance over time—no harsh chemicals or stripping needed.

Key Benefits

• Deep-penetrating, natural oil-based finish
• One-coat application for most surfaces
• Low VOC and non-toxic formulation
• Augments wood color and grain clarity
• Excellent workability and flow
• No harsh solvents or grain-raising additives

Where to Use

• Interior timber beams and posts
• Furniture and cabinetry
• Wood floors and stair treads
• Wood paneling and wall coverings
• Doors, trim, and wood accents

Application Notes

Surface Preparation Requirements

• Sand with 100–150 grit paper in the direction of the grain
• Ensure the surface is clean and dust-free
• Repair defects using solvent-based tinted fillers only
• Ideal wood moisture content: dry interior wood conditions

Application

• Apply with a quality brush, applicator pad, or lint-free cloth
• Spread liberally and remove excess material
• Wipe or polish evenly to a consistent, low-lustre finish
• Stir well before and during application if tinted
• Allow 4–24 hours to dry between coats (based on temperature and humidity)
• Optional: Apply a second coat for added protection

Coverage

Maintenance Required

Sansin Nature’s Oil is easy to maintain with periodic touch-ups as needed. Simply clean the surface and reapply a thin coat. No sanding or stripping is required unless excessive build-up or uneven sheen develops. Re-oiling high-touch areas yearly will maintain a rich appearance and surface protection.

Frequently Asked Questions

What is Sansin Nature’s Oil made from?

It is made from premium natural plant oils and contains no harsh solvents.

Is it safe for use on furniture and children’s items?

Yes, once fully cured it is safe and non-toxic for indoor use on all wood surfaces.

Can I use it on floors?

Yes, Nature’s Oil provides a deep-penetrating finish ideal for wood floors, but may require periodic recoating in high-traffic areas.

Do I need to sand between coats?

No. Just ensure the previous coat is dry and free of dust before applying another layer.

Does it change the color of the wood?

It enhances the natural tone of the wood and deepens grain contrast, especially when used in tinted versions.

Is it grain-raising?

No, it is a Non-Grain Raising (NGR) formula and leaves a smooth finish.

How do I clean up after application?

Use D-Limonene or mineral spirits to clean tools. Soak and properly dispose of oily rags to avoid spontaneous combustion.

What’s the drying time?

Dries to touch in 4 hours at 20°C (68°F); allow up to 2 days for thorough cure.

Can I dilute it?

Yes, it can be used concentrated or diluted to control penetration and coverage.

How do I dispose of rags or pads used for application?

Soak them in water immediately and place in a sealed metal container to avoid fire risk.

Downloads

• 📎Sansin Nature’s Oil Product Data Sheet (PDF)
• 📎Sansin Nature’s Oil Safety Data Sheet (PDF)