Perma-Chink Lifeline Ultra-2 Stain (Water Based)
Lifeline Ultra-2 is Perma-Chink’s premium two-coat exterior stain system designed for log and timber homes. It enhances wood grain clarity, resists UV damage, and delivers long-lasting protection when used with Lifeline Advance clear coat. Ideal for new construction or restoration.
REQUEST FREE SAMPLES (click here)
Perma-Chink Colors
Perma-Chink Lifeline Ultra-2
Premium Two-Coat Exterior Log Home Stain with Exceptional Color Clarity and Durability
What Makes Lifeline Ultra-2 Unique?
Lifeline Ultra-2 is Perma-Chink’s flagship two-coat exterior stain system, offering advanced water-based protection that showcases the natural grain of your logs while delivering superior UV resistance and long-term color retention. Engineered to work as part of a system with Lifeline Advance clear topcoat, Ultra-2 forms a breathable, flexible film that minimizes maintenance and helps prevent peeling or flaking over time. Whether you’re staining new construction or restoring a log home, Ultra-2 enhances wood beauty while providing high-performance protection.
Where to Use
- Exterior log walls (new or restored)
- Log-sided homes
- Timber frame structures
- Trim and fascia (when paired with Lifeline Accents)
Key Benefits
- Two-coat formula for rich color depth and high coverage
- Creates a breathable film that resists blistering, cracking, and peeling
- Exceptional UV protection when paired with Lifeline Advance topcoat
- Soap and water cleanup
- Available in a wide range of natural wood tones
Application Notes
- Surface must be clean, dry, and free from mill glaze, dirt, and existing coatings.
- For new wood, wash with Log Wash. Use Wood ReNew or Oxcon to remove grayed wood or rust stains.
- Apply the first coat of Ultra-2 using airless sprayer (.015–.017 tip) or brush. Back-brush thoroughly.
- Allow the first coat to dry before applying the second coat. Multiple coats can be applied in a single day under dry conditions.
- Always follow with Lifeline Advance topcoat for full system protection.
Coverage
| Coat | Square Feet per Gallon |
|---|---|
| First Coat | 350–450 sq.ft. |
| Second Coat | 600–800 sq.ft. |
Maintenance Required
Routine maintenance includes periodic washing with Log Wash to remove dust and debris. Test for water repellency annually by spraying water on the wall; if water absorbs instead of beading, reapply Lifeline Advance topcoat. Recoat interval typically ranges from 3 to 5 years depending on exposure and climate conditions.
Frequently Asked Questions
- How many coats of Lifeline Ultra-2 are required?
- Lifeline Ultra-2 is a two-coat system followed by a Lifeline Advance clear coat for complete protection.
- Can I apply Ultra-2 over a previously stained surface?
- If the previous coating is not a Lifeline stain, it must be fully removed. For reapplication over Lifeline, clean with Log Wash and follow standard procedures.
- What topcoat should I use with Ultra-2?
- Lifeline Advance is the only recommended clear topcoat for use with Ultra-2. It enhances durability and adds water repellency.
- Can I apply Ultra-2 without spraying equipment?
- Yes, you can brush it on, but best results are achieved using an airless sprayer followed by back-brushing.
- Is Ultra-2 safe to use around plants?
- Yes, but you should cover or wet nearby vegetation to protect from overspray or drips.
- What temperature range is best for application?
- Apply when surface and air temperatures are between 4°C (40°F) and 32°C (90°F). Avoid direct sunlight and rain within 6 hours.
- How do I clean my tools after use?
- Clean tools immediately with warm water and mild soap. Avoid letting the product dry in the equipment.
- Can I use Ultra-2 on decks or horizontal surfaces?
- No, Ultra-2 is designed for vertical wall applications. Use Deck Defense for decking and railing surfaces.
- Does Ultra-2 offer mold or mildew protection?
- Yes. When applied properly and paired with Lifeline Advance, the finish resists fungal growth and weathering.
- How do I test if it’s time to reapply the topcoat?
- Spray water on the surface. If it darkens or absorbs, it’s time to reapply Lifeline Advance.
Downloads
Perma-Chink Stain Calculator
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Select Size | 5 Gallon ,1 Gallon ,Sample |
| Color | Pickled White 850 ,Classic Brown 878 ,Beachwood 848 ,Barn Gray 872 ,Chestnut 868 ,Driftwood 861 ,Sequoia 835 ,Oak 832 ,Wheat 821 ,Natural 880 ,Hazelnut 870 ,Stone Gray 863 ,Dark Honey 822 ,Butternut 854 ,Walnut 865 ,Gentry 842 ,Bronze 874 ,Cedar 885 ,Dk Natural 830 ,Autumn Gold 815 |
| Brand | Perma-Chink |
Reviews
There are no reviews yet.