Western Canada
Open 7 Days a week!!
Oxcon (Oxalix Acid Concentrate)
$69.99
Oxcon (oxalic acid concentrate) is the only effective treatment for rust stains from around nails, spikes, and screws.
Oxcon comes as a concentrate that is diluted with water prior to use. It is best applied using a garden type pump-up sprayer but a brush or broom will also work. Apply a liberal amount to the wood, let it work on the surface for 10 to 15 minutes and rinse it thoroughly with clean water.
Oxcon should not be used for spot cleaning since it may cause blotching of the surface.
REQUEST FREE SAMPLES (click here)
Description
Application
Product Details
Documentation
Application
Oxcon Available Sizes
Apply a liberal amount to the wood, let it work on the surface for 10 to 15 minutes and rinse it thoroughly with clean water.
Product Information
Oxcon should not be used for spot cleaning since it may cause blotching of the surface.
Features
- Convenient 4-to-1 Concentrate
- Eliminates “Iron Stains”
Product Details
Application Temperature
40° to 90°F
Application Methods
Garden pump sprayerSpecial Instructions
Apply from bottom-up, rinse from top-downRinse thoroughly and completely
Do not allow to freeze
Shelf Life
1 Year
Frequency
As neededSurface Preparation
Clean and mold freeCoverage Rate
1000-2000 square feet / gallonDocumentation
Perma-Chink Stain Calculator
Measured Square Footage
Type of Log
Maintainance Coat?
Rough Surface?
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
Email Address
Product
Your Name
Your Email
Contractor's Name
Contractor's Email
Product
Lifeline Ultra 2 first Coat: 0.0 Lifeline Ultra 2 Second Coat: 0.0Products Details
Lifeline Ultra 7 first Coat: 0.0 Lifeline Ultra 7 Second Coat: 0.0Products Details
Lifeline Exteriors first Coat: 0.0 Lifeline Exteriors Second Coat: 0.0Products Details
Lifeline Interiors first Coat: 0.0 Lifeline Interiors Second Coat: 0.0Products Details
Lifeline Advance first Coat: 0.0 Lifeline Advance Second Coat: 0.0Products Details
Lifeline Acrylic first Coat: 0.0 Lifeline Acrylic Second Coat: 0.0Products Details
Lifeline Accents Exterior first Coat: 0.0 Lifeline Accents Exterior Second Coat: 0.0Products Details
Lifeline Accents Interiors first Coat: 0.0 Lifeline Accents Interiors Second Coat: 0.0Products Details
Lifeline Prelude first Coat: 0.0 Lifeline Prelude Second Coat: 0.0Products Details
Log End Seal first Coat: 0.0 Log End Seal Second Coat: 0.0Products Details
Log and Timber Defense first Coat: 0.0 Log and Timber Defense Second Coat: 0.0Products Details
Deck Defense first Coat: 0.0 Deck Defense Second Coat: 0.0Products Details
Sure Shine first Coat: 0.0 Sure Shine Second Coat: 0.0Products Details
Log Wash first Coat: 0.0 Log Wash Second Coat: 0.0Products Details
Cedar Wash first Coat: 0.0 Cedar Wash Second Coat: 0.0Products Details
Wood Renew first Coat: 0.0 Wood Renew Second Coat: 0.0Products Details
Strip It first Coat: 0.0 Strip It Second Coat: 0.0Products Details
S-100 first Coat: 0.0 S-100 Second Coat: 0.0Products Details
Oxcon first Coat: 0.0 Oxcon Second Coat: 0.0Products Details
×
×
×
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Select Size | 5 Gallon, 1 Gallon |
| Brand | Perma-Chink |
Reviews (0)
Shipping & Delivery
You may also like…
Log Wash
Log Wash is a liquid concentrate for cleaning log and wood surfaces. It can be used as a maintenance cleaner or to prepare the surface of wood for a new coat of stain or topcoat.
For preparing the surface of bare wood for a new coat of stain, Log Wash removes dirt, grime, pollen, and surface stains without harming the wood or the finish. As opposed to bleach solutions, Log Wash does not upset the natural pH balance of the wood, thus preventing wood fiber damage and iron tannate stains. (To treat gray, UV-exposed wood see Wood Renew).
The exterior of a log home is a settling ground for dust, pollen and other airborne contaminants that dull the surface and encourage mold growth. A light cleaning once or twice a year will keep a home looking beautiful and helps prolong the life of the exterior wood finish.
REQUEST FREE SAMPLES (click here)
Stain Calculator & More Info
Cedar Wash
Cedar Wash is a Ready-to-Use cleaner specifically formulated for preparing the bare wood surface of wood species that contain high levels of wood extractives and resin oils. Cedar Wash is designed to remove surface resin oils and high concentrations of water-soluble wood extractives in addition to dirt, grease, grime, pollen, and surface stains without harming the wood.
We highly recommended Cedar Wash as a cleaner for Southern Pine, Douglas Fir, Spruce and Cypress logs.
REQUEST FREE SAMPLES (click here)
Stain Calculator & More Info
Wood Renew
Wood ReNew is a biodegradable percarbonate-based wood cleaner that cleans and brightens grayed and weathered wood. Use it to return wood to its original natural color before applying any of our quality wood finishes.
Wood ReNew contains a thickener that helps it adhere to log walls and siding. Simply mix the Wood ReNew concentrate with water, stir, and liberally apply it to the wood with a mop or brush.
Wood ReNew will immediately begin to fizz and foam as it removes dirt and grime. After about 10 minutes scrub the wood with a medium-bristle brush and rinse thoroughly with clean water. Dirt, stains from mold and mildew, water stains, and UV damage will be gone and the wood will have a new, fresh look.
Wood ReNew should not be used for spot cleaning since it may cause blotching of the surface.
REQUEST FREE SAMPLES (click here)
Stain Calculator & More Info
S-100 Stripper
S-100 Finish Remover is an environmentally friendly water-based solvent that removes many oil and water-borne finishes from logs, siding, and decks. Perma-Chink Systems developed a finish remover using new technology originally developed for removing paint from aluminum aircraft surfaces.
Supplied as a ready-to-use gel, it is easily applied with a short bristled brush, paint roller, or airless sprayer. Within a few minutes it begins to soften the finish and since it is a gel, it stays wet and active for a fairly long period of time. Once the finish has sufficiently softened, it can be removed by simply pressure washing.
S-100 will not darken or discolor the wood, will not corrode or discolor metal surfaces, nor will it harm log home chinking or sealants. Although it is effective for removing most log home finishes, there are some high performance coatings that may require a more aggressive chemical stripper. Perma-Chink Systems recommends that a sample of S-100 be obtained from them and tested on the finish you want to remove prior to placing an order.
REQUEST FREE SAMPLES (click here)
Stain Calculator & More Info
StripIt Stripper
StripIt is a water-based, non-hazardous pH neutral stain and finish remover. StripIt removes multiple layers in one application. StripIt is odor free and can be used for interior and exterior applications. It will not raise the grain.
StripIt contains no harsh chemicals, is biodegradable and non-flammable, and unlike caustic strippers, StripIt will not darken nor discolor the wood.
REQUEST FREE SAMPLES (click here)
Stain Calculator & More InfoRelated products
Perma-Chink Lifeline Ultra-2 Stain (Water Based)
Log & Timber Stains Perma-Chink Log Stains Stain with a Clear Coat Water Based Step 3 – Stain & Clear
Lifeline Ultra-2 is Perma-Chink’s premium two-coat exterior stain system designed for log and timber homes. It enhances wood grain clarity, resists UV damage, and delivers long-lasting protection when used with Lifeline Advance clear coat. Ideal for new construction or restoration.
REQUEST FREE SAMPLES (click here)
Stain Calculator & More Info
Sikkens Deck Stain
Sikkens deck stain Cetol DEK Finish, now renamed Sico Proluxe Premium Deck Wood Finishing in Canada  is a high performance, translucent satin finish for exterior decks. This alkyd high solids formulation offers optimum protection, ultimate durability and a beautiful furniture finish appearance with the simplicity of a one product two coat application
Sikkens Cetol 1 (Oil Based)
Log & Timber Stains Oil Based Sikkens Log Stains Wood, Deck & Trim Stains Sikkens Wood, Deck & Trim Stains Step 3 – Stain & Clear
Sikkens Cetol 1 RE Stain is a premium, translucent, exterior wood base coat to be used with Sikkens Cetol 23 Plus. Its superior oil alkyd formulation offers excellent penetration and adhesion to vertical wood surfaces. Powerful UV absorbents protect color and wood substrates. Provides a mildew-resistant finish.
Stain Calculator
Lifeline Interior Stain
Transparent Wood Finish
Enhance the beauty of all your interior wood and seal out household odors and contaminants. Lifeline Interior can be used as a color coat or sealing coat on walls when you want to apply an interior clear-coat for additional protection or luster. Interior finishes make log walls easy to clean.
Lifeline Interior breathes to allow trapped moisture to evaporate from logs. The addition of UV Boost to the first coat of Lifeline Interior significantly reduces the ‘picture frame effect’ in sun-exposed locations.
Lifeline Interior will not yellow. You can apply multiple coats to develop the color and film thickness that you desire. Lifeline Interior is completely compatible with our other interior finish options.
REQUEST FREE SAMPLES (click here)
Stain Calculator & More Info
Sansin Wood Strip
Sansin Wood-Strip is a biodegradable gel that removes paints, stains, sealers, and weathering from wood surfaces. Safe, low-VOC, and easy to rinse, it includes Sansin Wood Lightener® to restore and brighten wood before refinishing.
Product Quantity Calculator & More Info
Sansin Wood Lightener
Sansin Wood Lightener is a biodegradable brightening and neutralizing powder that restores the natural color of wood after cleaning or stripping. Ideal for use with Sansin Wood Wash and Wood-Strip, it ensures a uniform surface and improves coating adhesion for both interior and exterior wood applications.
CPR Log Cleaner & Brightener
CPR® Log Cleaner and Brightener brings your logs and wood back to life. CPR cleans and brightens bare logs and wood, and restores luster and vibrancy when used for routine log home maintenance. It’s a gentle log and wood home cleaner whose oxygenated bleach formula won’t weaken wood fibers. It effectively kills mold, mildew and fungus, while also removing dirt, dust, pollen and other surface contaminants. Use CPR in conjunction with power washing or media blasting to perfectly prepare wood surfaces before staining, or apply with a pump sprayer and rinse with a hose for routine maintenance..
Buffy Pad System
Use these helpful tools so finish sanding won’t wear you out.
Sashco’s Buffy Pad system are the efficient and easy-to-use alternatives to everyday sandpaper. They make quick work of removing wood fuzz (called felting), and are gentle yet effective when used on hand-peeled logs and delicate wood fixtures that require a light touch.Use these helpful tools so finish sanding won’t wear you out. Less agressive than an Osborn brush for finish sanding, but also able to run up to 4000 RPM instead of 1800 RPM for an Osborn brush. (This allows it to be used on a variable speed grinder or car polisher)Â
Reviews
There are no reviews yet.