Sansin Purity Glacier – Crystal Clear Interior Wood Finish

Sansin Purity Glacier is a crystal-clear, non-yellowing interior wood finish designed to protect fine wood surfaces with exceptional beauty and durability. Ideal for cabinetry, millwork, doors, windows, furniture, and timber interiors, this two-coat system forms a tough, water-resistant film with excellent clarity. Available in Gloss, Satin, Low Lustre, and Extra Low Lustre, Purity Glacier enhances the natural appearance of wood while exceeding KCMA and BIFMA performance standards.

What Makes Sansin Purity Glacier Unique?

• Non-yellowing, water-based formulation designed for clarity and long-lasting beauty.
• Ideal for use on furniture, paneling, cabinetry, log home interiors, and fine wood detailing.
• Can be tinted for shading or applied over Purity Stain or Gel for color-rich results.
• Forms a tough, UV-resistant, water-repellent film that stands up to daily wear.
• Exceeds KCMA and BIFMA requirements for hardness and finish performance.

Key Benefits

• Exceptional water resistance and easy soap-and-water cleanup.
• Excellent clarity and leveling—perfect for fine wood grain finishes.
• Low VOCs (71 g/L), non-flammable, and low-odor formula.
• Available in four sheens: Gloss, Satin, Low Lustre, and Extra Low Lustre.
• Compatible with spray, brush, or pad application methods.

Application Notes

• Number of Coats: Two coats recommended. A third coat may be applied after 24 hours for added protection or gloss.
• Surface Prep: Sand with 120–150 grit, vacuum dust, and wipe clean. Do not use steel wool or iron-based materials.
• Application Tools: Brush, pad applicator, or spray (air assist or conventional). Do not use high-shear pumps. Stir well; do not shake.
• Dry Time: Touch dry in 30 minutes. Recoat after 1 hour under ideal conditions (20°C, 70% RH).
• Optional Tinting: Compatible with Sansin microfine tints for custom shading or toning.

Coverage

Maintenance Required

• Inspect for damage or wear. Spot or full-board repairs may be required for exposed areas.
• Clean with Multi-Wash. Allow to dry. Sand lightly with 220–320 grit before reapplying Glacier.
• For proactive maintenance, apply a single coat over properly cleaned and prepped surfaces.

Where to Use Sansin Purity Glacier

• Wood cabinetry and shelving
• Doors and windows (interior)
• Interior paneling, ceilings, and walls
• Furniture and millwork
• Log and timber home interiors

Frequently Asked Questions

What is Sansin Purity Glacier?

A crystal-clear, non-yellowing interior finish for cabinetry, furniture, and fine wood surfaces. It forms a tough, water-resistant film while preserving wood’s natural beauty.

How many coats are required?

Two coats are recommended. A third coat can be added after 24 hours for extra gloss or durability.

Can it be used over stained wood?

Yes. Apply over Sansin Purity Interior Stain or Gel for added color. Also tintable with Sansin microfine tints for shaded effects.

What sheen options are available?

Gloss, Satin, Low Lustre, and Extra Low Lustre are all available to match your interior design needs.

What is the drying time?

Touch dry in 30 minutes. Recoating is typically safe after 1 hour at 20°C with good airflow.

Is it UV resistant?

Yes. Sansin Purity Glacier provides UV protection to help preserve wood tone and clarity indoors.

Is it low-VOC?

Yes. The actual VOC content is only 71 g/L, making it compliant with green building standards.

How should I apply it?

Use a high-quality nylon/polyester brush, pad applicator, or spray system. Stir gently before and during application.

Is it suitable for log home interiors?

Absolutely. It’s perfect for logs, timbers, walls, ceilings, and other high-exposure interior wood features.

Can I use it in high-moisture areas?

Yes. Purity Glacier is water-resistant and holds up well on cabinetry and wood near kitchens or bathrooms, but is not meant for exterior use.

Downloads

• 📎Sansin Purity Glacier Product Data Sheet (PDF)
• 📎Sansin Purity Glacier Safety Data Sheet (PDF)