Sansin Wood Strip
$62.99
Sansin Wood-Strip is a biodegradable gel that removes paints, stains, sealers, and weathering from wood surfaces. Safe, low-VOC, and easy to rinse, it includes Sansin Wood Lightener® to restore and brighten wood before refinishing.
Sansin Wood-Strip
Biodegradable Wood Coating Remover with Brightening System
Sansin Wood-Strip is a ready-to-use gel that effectively removes paints, stains, sealers, and water repellents from wood surfaces. Designed for both new and weathered wood, it also eliminates mold, mildew, and UV discoloration, restoring the natural beauty of the surface. This biodegradable, low-VOC stripper rinses off with water and comes with Sansin Wood Lightener® for complete restoration.
What Makes Sansin Wood-Strip Unique?
Unlike harsh chemical strippers, Sansin Wood-Strip offers a safer, eco-conscious solution for coating removal. With zero VOCs and no solvents, it is non-flammable, non-toxic, and easy to apply. Its gel formulation allows for targeted coverage and extended dwell time, while the included Sansin Wood Lightener® helps neutralize and brighten the surface post-stripping—ensuring a perfect foundation for refinishing.
Key Benefits
- Strips paint, stains, and sealers
- Eco-friendly and biodegradable
- Includes Sansin Wood Lightener®
- Low odor and non-flammable
- Gel formula clings to vertical surfaces
- Rinses clean with water
Where to Use
- Log homes
- Wood siding (horizontal and vertical)
- Decks and porches
- Wood fences and gates
- Board-and-batten and timber surfaces
- Any exterior wood needing coating removal and restoration
Application Notes
Surface Preparation Requirements
- Ensure wood is dry and ambient temperature is above 20°C (70°F)
- Protect surrounding vegetation and non-wood surfaces
- Do not apply in direct sunlight or allow to dry on the surface
Application
- Apply liberally with brush, roller, or sprayer
- Mist with water periodically to keep active
- Let dwell for 20+ minutes, agitate with stiff brush
- Rinse with water or low-pressure washer (max 500 psi)
- Allow wood to dry fully before continuing
Step 2 – Sansin Wood Lightener®
- Dissolve the included bag in 1.5–2 gallons (5.75–7.5 L) of water
- Apply evenly, let sit 10 minutes
- Rinse off with water
- Let wood dry fully before sanding with 60–80 grit
Coverage
Surface Condition | Estimated Coverage per U.S. Gallon |
---|---|
Light Coating or Fading Only | 150–200 sq. ft. |
Heavy Coating or Build-Up | 100–150 sq. ft. |
Maintenance Required
Sansin Wood-Strip is a single-use prep product. No maintenance is needed. After use, allow the wood to dry thoroughly and sand before applying a finish. Proper preparation is essential for long-term finish performance.
Frequently Asked Questions
- What types of coatings can Sansin Wood-Strip remove?
- It removes most paints, stains, sealers, mold, mildew, and weathering from wood.
- Is it safe to use near gardens or plants?
- Yes, but protect vegetation by wetting it beforehand or shielding with plastic.
- Does it work on vertical surfaces?
- Yes, the gel formula clings to logs, siding, and upright wood components.
- How long should I let it sit before rinsing?
- Allow at least 20 minutes. Do not let it dry—mist with water to keep it active.
- Why do I need to use the Wood Lightener®?
- It neutralizes the wood’s pH and brightens the surface before refinishing.
- Can this product be used indoors?
- No. It is for exterior use only.
- What safety gear should I wear?
- Wear gloves, boots, goggles, and a respirator if spraying. Avoid skin contact.
- What’s the best temperature for use?
- Use in temperatures above 20°C and avoid direct sunlight.
- How do I prep the surface after stripping?
- Once dry, sand smooth surfaces with 60–80 grit before applying a new finish.
- How should the product be stored?
- Store in a cool, dry place. Do not allow freezing. Do not reuse container.
Downloads
Weight | 12 lbs |
---|---|
Dimensions | 9 × 6 × 12 in |
Reviews
There are no reviews yet.