Sansin ENS Naturals Topcoat – Clear Natural-Tone Exterior Finish

Sansin ENS Naturals Topcoat is a clear, wood-toned, environmentally friendly finish that enhances the tone and color of natural wood over existing finishes. Designed for both vertical and horizontal surfaces, this high-durability topcoat brings out the depth and character of natural wood while boosting protection against UV rays, moisture, and wear. Ideal for use over existing coatings like SDF, Classic, DEC, or ENS, it leaves a rich satin sheen and provides excellent adhesion and water repellency.

What Makes Sansin ENS Naturals Topcoat Unique?

• Enhances the tone and depth of natural wood finishes without altering color.
• Compatible with transparent water- and solvent-based systems including Sansin SDF, Classic, DEC, and ENS.
• Formulated as a neutral, pretinted topcoat for rich, attractive results.
• Offers exceptional UV resistance, water repellency, and long-term durability.
• Low-VOC, non-flammable, and safe for outdoor use on wood, fiberglass, and composite surfaces.

Key Benefits

• Boosts the performance and appearance of natural-toned finishes.
• Provides a smooth satin finish and enhanced dimensional stability.
• Low odor, fast drying, and cleans up easily with soap and water.
• Ideal for decks, siding, furniture, millwork, windows, doors, and garage doors.
• Resists fading, cracking, blistering, and erosion over time.

Application Notes

• Number of Coats: Typically 2 coats. Apply a manageable film thickness to avoid overworking.
• Surface Prep: Clean with Sansin Multi-Wash, rinse, dry thoroughly, and sand entire surface with #60–#80 grit. Ensure the surface is free of grease, wax, and contaminants.
• Application Tools: Brush or spray using air assist or airless systems. Avoid high-shear pumps.
• Dry Time: Touch dry in 40 minutes. Recoat after 4 hours at 20°C (68°F). Full cure: 5–7 days.
• Application Conditions: Avoid direct sun or application to warm surfaces. Do not apply in freezing or rainy conditions.

Coverage

Maintenance Required

• Maintenance required every 4–5 years on vertical surfaces, or sooner based on wear and exposure.
• Inspect regularly for signs of fading, erosion, or loss of water repellency.
• Clean surface with Sansin Multi-Wash, scuff sand, and reapply one coat of ENS Naturals Topcoat as needed.

Where to Use Sansin ENS Naturals Topcoat

• Wood siding, trim, and millwork
• Wood and fiberglass windows and doors
• Decks and outdoor furniture
• Garage doors and vertical architectural wood
• Over transparent or natural-toned coatings (SDF, Classic, DEC, ENS)

Frequently Asked Questions

What is Sansin ENS Naturals Topcoat?

A clear satin-finish topcoat designed to enhance the natural beauty of wood tones over existing finishes while improving durability and UV protection.

Can I use ENS Naturals Topcoat alone?

No. It is designed to be applied over a previously coated surface using SDF, Classic, DEC, ENS, or other transparent finishes.

Is it truly clear?

ENS Naturals Topcoat is a neutral-toned clear designed to enhance and deepen the look of natural wood colors without altering them. Always test first for final appearance.

What finish does it leave?

It dries to a smooth, satin sheen that enhances both vertical and horizontal surfaces.

Is it UV resistant?

Yes. It is formulated for exceptional UV resistance, helping to prevent fading and color degradation of underlying stains.

How often do I need to recoat?

Typically every 4–5 years for vertical surfaces. Recoat sooner if wear, fading, or erosion is evident.

What surfaces can I apply it to?

Wood, metal, fiberglass, or composite surfaces previously coated with a compatible finish.

What’s the drying time?

Touch dry in 40 minutes, recoat in 4 hours, and full cure in 5–7 days depending on temperature and humidity.

Is it environmentally safe?

Yes. ENS Naturals Topcoat is water-based, low-VOC (72 g/L actual), and non-flammable.

How do I prepare the surface before application?

Clean with Sansin Multi-Wash, sand with #60–#80 grit, and ensure the surface is dry and free from contaminants.

Downloads

• • 📎Sansin ENS Naturals Topcoat Product Data Sheet (PDF)
  • 📎Sansin ENS Naturals Topcoat Safety Data Sheet (PDF)

Rich, translucent hues that define the grain of your wood and reward the eye.

Deep, saturated colors that showcase the exceptional beauty of wood.

For a semi Transparent look use Classic or Dec. For a solid look use ENS.

Powerful, ultra-saturated colors that make your project stand out from the crowd.

For a Semi Transparent look Use Classic, Dec or SDF. For a solid look use ENS.

Beautiful color and texture, paired with exceptional performance, color retention, adhesion and scuff resistance.

These colors are available in SDF and ENS only. Please consult with dealer for ENS solid hide 20 year warranty details and terms and conditions.