Anchorseal Canada Log End Seal
Price range: $59.99 through $269.99
Anchorseal is available in both the Classic Formula and the Anchorseal 2 hybrid formula.
ANCHORSEAL® Classic is a premium wax emulsion end grain sealer for the prevention of end checks and drying splits in hardwood and softwood logs and lumber. By controlling the rate of moisture loss, up to 90% of end checks can be prevented.
ANCHORSEAL® 2 is a hybrid of plant-based polymers and wax that protects the ends of green logs and lumber from checking and splitting. It is a high-performance, economical choice for customers. ANCHORSEAL 2 is best-in-class for the protection of exotic hardwood decking. When carefully applied to the freshly cut ends of tropical hardwoods, such as ipe, Brazilian walnut, mahogany and tigerwood, ANCHORSEAL 2 prevents up to 90% of end checking, protecting your investment and extending the life of the deck.
Update: Anchorseal’s parent company has raised their pricing and decided to charge dealers essentially the same price as the general public. This effectively killed off the Canadian dealer market and we can only assume that was the intent as no explanation was given after years of carrying their product. The American website doesn’t ship to Canada anymore either. We have sourced another product designed to do the same thing, backed and manufactured by Sansin, a CANADIAN company. We will not be recommending Anchorseal to any Canadian clients, instead we would recommend Sansin’s End Seal.
- Prevents up to 90% of drying splits
- Reduces blue stain and sapstain in logs
- Improves yield with less waste
- Water-based
- Non-hazardous
- No solvents
- Available in summer and winter formulas
- Soap and water cleanup
Surface Preparation
- All areas to be coated should be clear of dirt and debris
Application
- Apply ANCHORSEAL using a brush, roller, or sprayer until it begins to drip slightly
- For optimal coverage, use a gas engine, electric, air operated, or backpack sprayer from U·C Coatings
- If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
- Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15-minute period
Cleanup & Storage
- Clean application equipment using hot soapy water
- Store unused ANCHORSEAL above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage
Color: Clear
Packaging Sizes
- 1 Quart Can
- 1 Gallon Can
- 5 Gallon Pail (Special Order)
- 55 Gallon Drum (Special Order)
- 275 Gallon Tote (Special Order)
Coverage
- 100 sq. ft./gallon, depending on application method and wood species
| Weight | N/A |
|---|---|
| Dimensions | N/A |
You may also like…
Spax Timber Screws
GRK Timber Screws
Want less than a case? For Singles or Smaller Packs check out LogBoss
Reviews
There are no reviews yet.